If your radio does not turn on, check the fuse panel refer to the vehicle owners
manual for radio fuse location.
If radio turns on, but you have "No Audio" check that the fader switch in center console is plugged in. This may require lifting the wooden console panel.
If your AM is poor, check the ground connection at your antenna and also confirm that all mast sections of the antenna are extended.
If the radio works properly but certain lines or segments are missing on the display, you may only need to have the faceplate rebuilt or exchanged.
There is no external amp in this car.
Upon reinstallation, if your antenna is no longer extending when radio is turned on, please refer to "Back Panel Instructions" on previous page/link. Verify the antenna trigger wire is attached to the proper location (next to the four pin power plug).
